Clorox Commercial Solutions® Clorox® Total 360™ System and Solutions

Superior Electrostatic Coverage with Trusted Clorox® Products for the Ultimate Disinfecting Solution

Easily deliver Clorox-approved products to hard-to-reach places.

Clorox Total 360 System

Quick Facts

The Cost-Effective Solution for Efficient Surface Coverage

  • Provides surface coverage up to 4x faster*
  • Covers up to 18,000 ft2 an hour
  • Uses up to 67% less solution*

Proven technology with Clorox Trusted Solutions

Clorox is proud to offer the first system that pairs an electrostatic sprayer with Clorox disinfectants and sanitizers. Electrostatic technology enables superior coverage of Clorox-trusted solutions in hard-to-reach places — the side, underside and backside of surfaces.

Clorox® Total 36™ Electrostatic Tech

*compared to a trigger spray

Clorox Total 360 Disinfectant Cleaner

  • 19 organism claims: Kills cold and flu viruses,* MRSA, norovirus and 15 other organisms in 2 minutes or less
  • One-step disinfecting
  • Eliminates odors

Effective against

VirusKill Time
Human Immunodeficiency Virus Type 1 2 minutes
Avian Influenza Virus 2 minutes
Human Rotavirus 2 minutes
Hepatitis B Virus 2 minutes
Hepatitis C Virus 2 minutes
Duck Hepatitis B Virus 2 minutes
Bovine Viral Diarrhea Virus 2 minutes
Norovirus 2 minutes
Canine Parvovirus 2 minutes
Rhinovirus Type 14 2 minutes
Rhinovirus Type 39 2 minutes
BacteriaKill Time
Pseudomonas aeruginosa 2 minutes
Salmonella enterica 2 minutes
Staphylococcus aureus 2 minutes
Methicillin-resistant Staphylococcus aureus 2 minutes
Vancomycin-resistant Enterococcus faecium 2 minutes
Multidrug-resistant (MDR) Acinetobacter baumannii 2 minutes
Extended Spectrum Beta-Lactamase Escherichia coli 2 minutes
Klebsiella pneumonia New Dehli Metallo-Beta Lactamase 2 minutes

This product is intended for use in:

  • Airports
  • Ambulances
  • Athletic facilities
  • Bathrooms
  • Correctional facilities
  • Daycare centers
  • Gyms
  • Health clubs
  • Homes
  • Hotels
  • Institutional kitchens
  • Laundry rooms
  • Offices
  • Schools

*Rhinovirus

  1. Clean gross filth by using standard manual cleaning protocols.
  2. Close the room to the general public. Place signs or warning indicators ondoors that indicate no one
  3. should enter the room.
  4. Power off any sensitive electrical devices but do not unplug them.
  1. Choose the appropriate Clorox-approved product for cleaning, sanitizing or disinfecting.
  2. Mount desired Clorox-approved product on Clorox Total 360™ Electrostatic Sprayer base and strap into place. Ensure that the bottles are positioned with the opening facing up and the opening facing the dispensing tubes.
  3. Unscrew the lid on the Clorox-approved product of your choice and connect the Clorox Total 360™ Electrostatic Sprayer dispensing cap to the bottle. Be sure the cap is screwed all the way down; do not overtighten.
  4. Unwrap electrical cord completely and plug Clorox Total 360™ Electrostatic Sprayer into a grounded, three-pronged socket.
  5. Locate the On/Off switch on the base unit. Push the Total 360 Sprayer to the On position. A blue light will illuminate on both the sprayer instrument panel and unit power switch.
  6. Put on appropriate personal protective equipment.
  7. Remove the sprayer from the unit. A blue power indicator light should be illuminated on the sprayer. The system is now ready for use.
  8. Prime the Clorox® Total 360™ Electrostatic Sprayer: Spray into a container, a drain or an inconspicuous corner. Spray the Clorox®Total 360™ Electrostatic Sprayer for about 20 seconds to generate a steady flow of solution.
  9. When spraying, a second blue indicator light will illuminate on the sprayer instrument panel when the trigger is depressed. NOTE: Sprayer will automatically stay on until trigger is depressed again.
  1. Position the Clorox Total 360™ Electrostatic Sprayer in a rear corner of the area.
  2. Direct the nozzle at the desired surface.
  3. Begin to spray. Press the sprayer button once to initiate spraying. Press once to stop flow of the sprayer.
  4. Follow a continuous path around the area, working from high to low areas and moving the sprayer in a sweeping motion until surfaces are thoroughly wet. After spraying, keep the area closed per product SDSs.
  5. Open the room once the reentry time has passed.
Quickstart Guide

  1. Stop spraying the Clorox Total 360™ Electrostatic Sprayer.
  2. Disconnect the bottle connection from the Clorox-approved product, and remove it from the sprayer. Cap the removed product if it is being stored.
  3. Purge the Clorox Total 360™ Electrostatic Sprayer: Spray into a container, a drain or an inconspicuous corner. Spray the Clorox Total 360™ Electrostatic Sprayer for about 20 seconds.
  4. Turn off the unit. The blue indicator light on the instrument panel and base of the unit should no longer be illuminated.
  5. Unplug the Clorox Total 360™ Electrostatic Sprayer.
  6. Wrap cord on cord holder on the base unit.
  7. Store in a safe, dry place.

Your healthcare facility can receive free product samples.*

Request yours while supplies last.










†While supplies last. Limit one per customer. Business or institutional customers only